Receiving automatically in fax mode, Receiving automatically in tel/fax mode – Xerox WorkCentre 470cx-9904 User Manual
Page 124
Book
TOC
Chapter
TOC
Search
4-4
Receiving Automatically in FAX Mode
1
Press the Receive button until the display indicates FAX.
2
When a fax call comes in, the machine answers on the second
ring and receives the fax automatically.
Note:
To change the number of rings before the machine answers
an incoming call, see
To adjust ringer volume, press the Menu
button and the System
Setup (04) button on the One-Touch keypad. Ringer volume is the
first item displayed. Press the
Start/Enter
button
. Use the Up
or
Down
button
to set the desired loudness. Press the Stop
button twice to accept and exit.
Receiving Automatically in TEL/FAX Mode
If you have an external phone connected to the EXT jack on the
left side of the machine, you can select TEL/FAX mode to receive
fax transmissions and answer voice calls.
1
Press the Receive button until the display indicates TEL/FAX.
2
When a call comes in, the machine answers on the second ring.
If a fax tone is sensed, the machine receives the fax
automatically.
Previous Page
Next Page