Print cartridge nozzle test, When you suspect the nozzles are clogged, When characters are not printing completely – Xerox WorkCentre 470cx-9904 User Manual
Page 263: Cleaning the print heads, To clean the print head using your workcentre, Print cartridge nozzle test on
Book
TOC
Chapter
TOC
Search
8-9
• Do not swap the color cartridge with the black or photo
cartridges. The color cartridge should be installed in the Left
carrier and the black or photo cartridge should be installed in
the Right carrier.
• If you have an opened ink cartridge you are not currently using
and do not have an available print cartridge storage unit, store it
in an airtight plastic bag. Do not leave it exposed to the air for
an extended period; this promotes drying out and clogging of
the print nozzles.
Print Cartridge Nozzle Test
You should test the print cartridge when the print is not clear or
image information is missing. The problem may be caused by
blocked nozzles on the ink cartridge.
The nozzle test cleans the ink cartridge by purging the nozzles.
Then it prints a test so you can see the results. Use the nozzle test:
• When you suspect the nozzles are clogged.
• When characters are not printing completely.
Cleaning the Print Heads
To clean the print head using your WorkCentre
The Clean Head procedure cleans the print nozzles and removes
any deposits that may impair printing functions.
Previous Page
Next Page