Press 2 to turn this feature off (off) – Xerox WorkCentre 470cx-9904 User Manual
Page 64
Book
TOC
Chapter
TOC
Search
1-58
Press 1 to print a confirmation report automatically each time
you send a fax (ON).
Press 2 to turn this feature off (OFF).
Press 3 to print only when an error occurs and the transmission
was not successful (ERR).
• AUTO JOURNAL - The journal is a report providing detailed
information about the previous 40 communication operations
including times and dates.
Press 1 to print the journal automatically after every 40
transmissions or receptions (ON).
Press 2 to disable automatic printing of the Journal (OFF). You
can still print Journal reports manually at any time. See
• REMOTE RCV CODE - The remote receive start code allows
you to initiate fax reception from an extension phone plugged
into the EXT jack on the back of the machine. If you pick up
the extension phone and hear fax tones, enter the Remote Code
and the machine will start receiving. The Remote Code is
preset to *9* at factory. You may change the Remote Code by
selecting any number from 0 to 9 on the numeric keypad.
• DIAL MODE - Select the type of dial system your fax machine
is connected to:
Previous Page
Next Page