Printer power is on, but nothing prints – Xerox WorkCentre 470cx-9904 User Manual
Page 247
Book
TOC
Chapter
TOC
Search
7-27
Printer power is on, but
nothing prints.
• The printer is improperly connected to the
computer. Make sure the printer cable is
firmly connected to the printer and the
computer.
• Make sure the printer cable is IEEE 1284-
compliant bi-directional parallel interface
cable.
• Bad printer cable, or computer port. Try
another cable.
• Make sure your application has the
WorkCentre 470cx selected as the default
printer.
Printer seems to be
printing, but no characters
are printing.
Check the print cartridge. Tape may be
covering the ink nozzles of the print
cartridge. The print cartridge may be out of
ink. Replace with a new one. See
the Ink Cartridge on page 8-18
. The status
monitor shows the amount of ink left in the
cartridge.
Symptom
Cause and Solution
Previous Page
Next Page