Xerox WorkCentre 470cx-9904 - Manual (Page 243)

Book
TOC
Chapter
TOC
Search
7-23
Print Quality Problems
Symptom Cause and Solution
Light or blurred
characters. • You may be using Draft quality or Normal
quality mode. Try using High 1200 dpi
print quality mode.
• The print cartridge may be running out of
ink. Replace the print cartridge. The
Status monitor shows the amount of ink
left in the cartridge.
• Make sure you are using the correct type
of paper. Try another type of paper.
• You may be printing on the wrong side of
the paper.
• The print head may need cleaning. See
Print Cartridge Nozzle Test on page 8-9 .
Solid black areas on
transparencies contain
white streaks. • Try changing the fill pattern in your
application software.
• The print head may need cleaning. See
Print Cartridge Nozzle Test on page 8-9 .
Previous Page Next Page