Reception modes – Xerox WorkCentre 470cx-9904 User Manual
Page 122
Book
TOC
Chapter
TOC
Search
4-2
Reception Modes
Your multi-function machine has four reception modes as
described below:
• FAX The machine answers an incoming call and immediately
goes into fax receive mode.
• TEL/FAX The machine answers the incoming call. If a fax
signal is not detected, the WorkCentre 470cx sounds a ringing
tone to indicate a voice phone call. If the external phone is not
lifted while the ringing tone is sounding, the machine will
switch to automatic fax reception mode.
• TEL In TEL mode, automatic fax reception is turned off. You
can receive a fax only by manually picking up the external
phone to accept the call and then pressing the Start/Enter
button to receive the fax.
• ANS/FAX To use the ANS/FAX mode, you have to attach an
answering machine to the EXT jack on your fax machine. If the
WorkCentre 470cx senses a fax tone, it automatically switches
to fax reception mode. However, if a fax is not sensed, the
WorkCentre 470cx routes the call to the answering machine,
and the caller can leave a message.
Previous Page
Next Page