Allied Telesis AT-S25 - Manual (Page 86)

Section II: Local and Telnet Mangement
86
Modifying a Trunk Name
To modify the name of a port trunk, perform the following procedure:
1. From the Main Menu, type 1 to select Ports Menu.
2. From the Ports Menu, type 3 to select Port Trunking.
The Port Trunking menu in Figure 29 on page 82 is displayed.
3. To modify a port trunk on a module other than the one currently
selected, type M.
The following prompt is displayed:
Select Module ID: [1 to 8] ->
4. Enter the ID of the module you want to select, and press the Enter key.
5. From the Port Trunking menu, type 4 to select Modify Trunk Name.
The following prompt is displayed.
Enter Trunk Number -> [1 to 6] ->
6. Enter the number of the port trunk you want to modify and press the
Enter key.
The following prompt is displayed.
Enter Trunk Name ->
7. Enter the new name for the port trunk. The name can be up to 30
alphanumeric characters.
8. Type S to select Save Configuration Changes.