Allied Telesis AT-S25 - Manual (Page 91)

AT-S25 Management Software User’s Guide
91
6. Configure the options in the menu as needed. Refer to the table
above for option definitions.
7. Type S to select Save Configuration changes.
The port mirror is immediately activated on the switch. You can
now connect a data analyzer to the destination port to monitor
the traffic on the source port.
4 - Source Module Use this option to specify the switch in the stack
containing the source port.
5 - Source Port Use this option to specify the source port. This is the
port whose traffic will be copied to the destination
port. You can specify only one port.
PARAMETER DESCRIPTION