Allied Telesis AT-S25 - Manual (Page 153)

AT-S25 Management Software User’s Guide
153
Viewing MAC
Addresses on
Base Ports Only
This selection is useful if you are managing an AT-8300 Series stack that
has switches containing optional expansion modules. You could use this
selection to view only those MAC addresses learned on the base ports of
the switches and exclude the ports on the expansion modules.
To view only the MAC addresses learned on the base ports, perform the
following procedure:
1. From the Main Menu, type 6 to select MAC Menu.
2. From the MAC Menu, type 4 to select Show MAC addresses on base
ports.
A window is displayed with the MAC addresses on the base ports.
An example of the Show MAC addresses on base ports window is
shown in Figure 60.
Figure 60 Show MAC addresses on base ports Window
This window is exactly the same as the Show all MAC addresses
window, except for the title. For information displayed in this
window, refer to the Table 11 in Viewing All MAC Addresses on
page 149.