Allied Telesis AT-S25 - Manual (Page 72)

Section II: Local and Telnet Mangement
72
Configuring Limited Security Level
Perform the following procedure if you intend to activate the Limited
security level on the stack. This procedure explains how to set the
maximum number of MAC addresses the port groups can learn. (The
default is 100.) You must set these values before you activate Limited
security level. If you want to set the stack to the Automatic, Secured, or
Lock All Ports security level, skip this procedure and go to Activating a
Port Security Level on page 75.
Note
This procedure can only be performed from a local management
session. You cannot perform it from a Telnet management session.
1. From the Main Menu, type 1 to select Ports Menu.
2. From the Ports Menu, type 5 to select Port Security.
The Port Security menu in Figure 24 is displayed.
Figure 22 Port Security Menu
3. From the Port Security menu, type 2 to select Port Security Limited-
Mode menu.