Snmp management session – Allied Telesis AT-S25 User Manual

Page 31

Text mode
Original mode

AT-S25 Management Software User’s Guide

SNMP Management Session

Another way to remotely manage a AT-8300 Series stack is with an SNMP
management program. A familiarity with Management Information Base
(MIB) objects is necessary for this type of management.

The AT-S25 software supports the following MIBs:

❑ SNMP MIB-II (RFC 1213)

❑ Bridge MIB (RFC 1493)

❑ Interface Group MIB (RFC 1573)

❑ Ethernet MIB (RFC 1643)

❑ Remote Network MIB (RFC 1757)

❑ Allied Telesyn Managed Switch MIB (atiStackSwitch.mib)

You must download the Allied Telesyn managed switch MIB file from the
Allied Telesyn web site and compile the file with your SNMP program.
For instructions, refer to your SNMP management documentation.

Note

A stack must have an IP address in order to be managed with an
SNMP program. Initially assigning an IP address is only possible from
a local management session.