Allied Telesis AT-S25 - Manual (Page 65)

AT-S25 Management Software User’s Guide
65
The Port Status window is displayed. Figure 18 is an example of
the window.
Figure 18 Port Status Window
Table 3 lists the parameters appeared in the Port Configuration
window. These parameters are for viewing purposes only.
Table 3 Port Status Parameters
PARAMETER DESCRIPTION
PortName/
UplinkType The name of the port or, in the case of an optional
uplink port, the uplink model (AT-A14, AT-A15, AT-A17,
AT-A18, or AT-A19).
State The current state of the port.
Possible settings for this parameter are:
• Enable (default)
• Disable
Nego The status of Auto-Negotiation on the port.
Possible settings for this parameter are:
• Auto - Indicates that the port is using Auto-
Negotiation to set operating speed and duplex mode.
• Manual - Indicates that the operating speed and
duplex mode have been set manually.