beautypg.com

Transferring files using hyperterminal interface – Allied Telesis AT-S25 User Manual

Page 186

background image

Section II: Local and Telnet Mangement

186

Transferring Files Using HyperTerminal Interface

This section contains the procedure for downloading or uploading a file
using the Hilgraeve HyperTerminal program.

1. From the HyperTerminal main window, select the Transfer menu.

2. Select Send File from the Transfer pull-down menu, as shown in Figure

70.

Figure 70 Local Management Window

The Send File window in Figure 71 on page 186 is displayed.

Figure 71 Send File Window

3. Click the Browse button and specify the location and file to be

downloaded onto the switch.

4. From the Protocol pull-down menu, select Xmodem or 1K XModem

as the transfer protocol. For faster transfer, 1K XModem is preferable.

5. Click Send.