Allied Telesis AT-S25 - Manual (Page 208)

Section III: Web Browser Management
208
The Settings for Port window is displayed. An example of the
window is shown in Figure 82.
Figure 82 Example of Settings for Port(s) Window
Note
Clicking Default returns the port settings to the default values.
Default values are listed in Appendix A, AT-S25 Default Settings
on page 272.
6. Enter or modify the port parameters as desired.
Table 19 lists the parameters appeared in the Settings for Port
window.
Table 19 Port Setting Parameters
Parameter DESCRIPTION
Disable Port Enables or disables a port. A disabled port will not
accept or transmit frames.
Possible settings for this parameter are:
• Disable
• Enable (default)
Disable
Broadcast Filter Enables or disables the broadcast filter for the selected
port.
Possible settings for this parameter are:
• Disable (default)
• Enable