Allied Telesis AT-S25 - Manual (Page 238)

Section III: Web Browser Management
238
The RSTP Configuration Spanning Tree window in Figure 92 is
displayed.
Figure 97 RSTP Configuration Spanning Tree Window
3. Enter or modify the RSTP configuration settings as desired.
For description of the parameters displayed in this window, refer
to Table 22, STP and RSTP Parameters on page 230.
4. Click Apply.
Changes are immediately activated on the switch.
Configuring a
Port’s RSTP
Settings
To configure a port’s RSTP settings, perform the following procedure:
1. From the RSTP Configuration Spanning Tree window, as displayed in
Figure 93 on page 233, select a port.
A selected port turns white. (To deselect a port, click it again.)
2. Click Settings.