Allied Telesis AT-S25 - Manual (Page 53)

AT-S25 Management Software User’s Guide
53
3. To configure SNMP access, type 3 to select SNMP Access. When
prompted, type E to enable SNMP management access or D to disable
it. By default, SNMP Access is Disabled.
With the SNMP Access disabled, no one will be able to manage the
stack remotely using an SNMP management program.
4. To configure web browser access, type 4 to select Web Server Access.
When prompted, type E to enable web access or D to disable web
access. By default, Web Server Access is Enabled.
If the Web Server Access is disabled, no one will be able to manage
the stack remotely using a web browser.
5. After you have made the desired changes, type S to select Save
Configuration changes.
6. Your changes are immediately activated on the stack.