Allied Telesis AT-S25 - Manual (Page 210)

Section III: Web Browser Management
210
Displaying Port Status and Statistics
The procedure in this section displays the operating status of the ports
on a switch and port statistics. You could view a port’s operating speed,
duplex mode, and more. You could also view the operating status of any
GBIC modules installed in an AT-8324.
To display the status or statistics of a switch port, perform the following
procedure:
1. From the Home page, select Monitoring.
2. From the Monitoring page, select Layer 1.
3. Select the Port Settings tab. The tab is shown in Figure 83.
Figure 83 Port Monitoring Page
A graphical image of an AT-8316F or an AT-8324 Fast Ethernet
Switch is displayed. Ports with valid links to end nodes contain a
green light.
4. Select a port. You could select more than one port at a time when you
wish to display port status. However, you could select only one port
when displaying statistics.
A selected port turns white. (To deselect a port, click it again.)
5. Click Status to display the port’s operating status or Statistics to
display port statistics.