Allied Telesis AT-S25 - Manual (Page 259)

AT-S25 Management Software User’s Guide
259
Deleting MAC Addresses
To delete a static, dynamic, or multicast MAC address from the switch,
perform the following procedure:
1. From the Home page, select Configuration.
2. From the Configuration page, select Layer 2.
3. From the Layer 2 page, select the MAC Address tab.
The MAC Address window in Figure 108 on page 255 is displayed.
4. Display the MAC addresses on the switch by selecting one of the
options. For instructions, refer to Viewing the MAC Address Table
on page 255.
5. Click on the button next to the MAC address that you wish deleted
from the switch.
6. Click Remove.