Allied Telesis AT-S25 - Manual (Page 213)

AT-S25 Management Software User’s Guide
213
If you select Statistics, the Statistics window in Figure 85 is
displayed.
Figure 85 Port Statistics Window
Table 21 lists the parameters appeared in the Port Statistics
window.
Table 21 Port Statistics Parameters
PARAMETER DESCRIPTION
Port Number of the selected port.
TX-Total Number of bytes transmitted out the port.
RX-Total
Number of bytes received on the port.
RX-Ucast Number of unicast packets received on the port.
RX-Bcast Received Broadcast - Number of broadcast packets
received on the port.
Rx-Mcast Received Multicast - Number of multicast packets
received on the port.
RX-CRC Number of packets with a cyclic redundancy check
(CRC) error but with the proper length (64-1518
bytes) received on the port.
RX-Frag
Number of undersized packets, packets with
alignment errors, and packets with FCS errors (CRC
errors) received on the port.
RX-Jabber Number of Jabber packets received. A Jabber packet
is a packet which has its length greater than
MAXFRAMESIZE, invalid CRC, and Rx error event has
been detected.
RX-Drop Number of dropped packets.
RX-Oversize Number of packets exceeding the maximum
specified by IEEE 802.3 (1518 bytes including the
CRC) received on the port.