Allied Telesis AT-S25 - Manual (Page 155)

AT-S25 Management Software User’s Guide
155
Viewing the
MAC Addresses
of a VLAN
The procedure in this section can be useful if you created VLANs on the
switch and want to view the MAC addresses of the nodes of a particular
VLAN. (This procedure is not of much value if the switch contains only
the Default VLAN, in which case displaying the entire MAC address table,
as explained earlier in this chapter, produces the same result.)
Note
To perform this procedure, you need to know the VID number of the
VLAN whose MAC addresses you want to view. To obtain a VLAN’s
VID, refer to Displaying VLAN Information on page 137.
To view the MAC addresses of a VLAN on the switch, perform the
following procedure.
1. From the Main Menu, type 6 to select MAC Menu.
2. From the MAC Menu, type 6 to select Show MAC addresses by VLAN ID.
The following prompt is displayed:
Please enter a VLAN ID: [1 to 2048] ->
3. Enter the VID of the desired VLAN and press the Enter key.
The management software displays a window with a list of the
MAC addresses of the nodes in the VLAN. For information
displayed in this window, refer to the Table 11 in Viewing All
MAC Addresses on page 149.