Allied Telesis AT-S25 User Manual
Page 196
Section III: Web Browser Management
196
Default
Gateway
This parameter specifies the default router’s IP address.
This address is required if you intend to remotely
manage the switch from a management station that is
separated from the switch by a router.
Manager
Password
These parameters are used to change the
administrator’s login password for the switch. The
password can be from 0 to 20 characters in length. The
same password is used for both local and remote
management interfaces. To create a new password,
enter the new password into both fields. The default
password is “friend”.
You should not use spaces or special characters, such as
asterisks (*) and exclamation points (!), in a password if
you will be managing the switch from a web browser.
Many web browsers cannot handle special characters in
passwords.
Confirm
Manager
Password
Operator
Password
These parameters are used to change the operator’s
login password for the switch. The password can be
from 0 to 20 characters in length. The same password is
used for both local and remote management interfaces.
To create a new password, enter the new password into
both fields. The default password is “operator”.
You should not use spaces or special characters, such as
asterisks (*) and exclamation points (!), in a password if
you will be managing the switch from a web browser.
Many web browsers cannot handle special characters in
passwords.
Operator
Confirm
Password
Configuration
BOOTP/DHCP
Defines whether the switch obtains its IP address from a
BOOTP or DHCP server on your network. If this
parameter is enabled, the switch obtains its IP address
from a BOOTP or DHCP server. For more information on
this parameter setting, refer to
.
Switch Mode
Defines the switch’s current VLAN mode. If this
parameter displays “Tagged,” the switch supports port-
based and tagged VLANs. If this parameter displays
“Basic,” the switch is operating in the Basic VLAN Mode.
For more information on this parameter setting, refer to
Setting the Switch’s VLAN Mode
MAC address
aging time
Specifies how long an inactive dynamic MAC address
can remain in the MAC Menu before it is deleted. The
default is 300 seconds (5 minutes). For more
information on this parameter setting, refer to
PARAMETER
DESCRIPTION