Allied Telesis AT-S25 - Manual (Page 163)

AT-S25 Management Software User’s Guide
163
Configuring CoS
To configure CoS for a port, perform the following procedure:
1. From the Main Menu, type 2 to select VLAN Menu.
2. From the VLAN Menu, type 2 to select Configure Port Priorities.
The Configure Port Priorities menu in Figure 61 is displayed.
Figure 61 Configure Port Priorities Menu
3. Type 1 to select Configure Port Priorities.
The following prompt is displayed:
Enter port number ->
4. Enter the number of the port on the switch where you wish to
configure CoS.
5. Press the Enter key. The Configure Port Priorities window in Figure 53
on page 141 is displayed.
6. Type 3 to select Priority (0-1) 0=Low 1=High.
The following prompt is displayed:
Enter new value -> [0 to 1]
7. Type 4 to select Override Priority.