Allied Telesis AT-S25 User Manual

Page 44

Section II: Local and Telnet Mangement

5 - Administrator

This parameter specifies the name of the network
administrator responsible for managing the stack. The
value range is 1 to 39 alphanumeric characters. This
parameter is optional.

6 - Comments

This parameter specifies additional information about
the stack, such as its location (for example, 4th Floor -
wiring closet 402B). The value range is 1 to 39
alphanumeric characters. This parameter is optional.

7 - BOOTP/DHCP

This selection activates and deactivates the BOOTP
and DHCP services on the stack. For information on
this selection, refer to Activating the BOOTP and
DHCP Services on page 46.

8 - Set
Passwords

This parameter is used to change the Manager and
Operator login passwords. For instructions, refer to
Configuring the Management Passwords on page
51.

9 - Reset Switch

This selection resets the stack.

P - Ping a
Remote System

For information on this selection, refer to Pinging a
Remote System on page 49.

D - Downloads &
Uploads Menu

For information on this selection, refer to Chapter 15,
File Downloads and Uploads on page 178.

PARAMETER

DESCRIPTION