Allied Telesis AT-S25 - Manual (Page 138)

Section II: Local and Telnet Mangement
138
Deleting a VLAN
This procedure deletes a port-based or tagged VLAN from a stack.
Note
To delete a VLAN, you need to know its VID. To view a VLAN’s VID,
perform to the procedure Displaying VLAN Information on page
137.
To delete a VLAN, perform the following procedure:
1. From the Main Menu, type 2 to select VLAN Menu.
2. From the VLAN Menu, type 1 to select VLAN Definition.
3. From the VLAN Definition menu, type 3 to select Delete VLAN.
The Delete VLAN menu in Figure 52 is displayed.
Figure 52 Delete VLAN Menu
4. Type 1 to select Select VLAN ID (VID) to delete.
The following prompt is displayed:
Enter new value -> [2 to 2048] ->
5. Enter the VID of the VLAN you want to delete and press the Enter key.
Note
You cannot delete the Default_VLAN, which has a VID of 1.
The specifications of the selected VLAN are displayed. Use this
window to confirm that you are deleting the correct VLAN.