Allied Telesis AT-S25 - Manual (Page 269)

AT-S25 Management Software User’s Guide
269
Displaying a List of Host Nodes and Multicast Routers
You could use the AT-S25 software to display a list of the multicast
groups on a stack, as well as the host nodes. You could also view the
multicast routers. A multicast router is a router that is receiving multicast
packets from a multicast application and transmitting the packets to
host nodes. To view host nodes and multicast routers, perform the
following procedure:
1. From the Home Page, select Monitoring.
The Monitoring window is displayed with the System menu
option selected by default.
2. If the System menu option is not selected, select it and then select the
IGMP tab.
The IGMP window in Figure 114 is displayed.
Figure 114 Monitoring - IGMP Window
The IGMP parameters displayed in this window are for
viewing purpose only. For information on these parameters, refer
to Configuring IGMP Snooping on page 266.
3. To view the multicast addresses and the host nodes, click View
Multicast Hosts List and then click View.