HP XP7 Storage - Manual (Page 87)

When the status is Installed (Disabled)
If you do not install the prerequisite software before you install the license key software, the software
will install correctly but will be disabled. To enable a license key, install the prerequisite software,
then enable the key. Detailed instructions to install the prerequisite software, are located in
“Software
and licensed capacity” (page 83) . Instructions to enable a license key are located in “Enabling a
license” (page 87) .
Enabling a license
You can enable a license that is in disabled status.
Prerequisites
You must have Storage Administrator (Initial Configuration) role to perform this task.
To enable a license:
1.
From the Administration tree, click License Keys. The License Keys window opens.
2. Select the license to enable. You can select more than one license to enable at the same time.
3. Display the Enable Licenses window in either of the following ways:
•
In the License Keys window, click Enable Licenses.
•
From the Settings menu, click Environmental Settings > Enable Licenses.
4. Check the settings and click Apply.
Related Topics
•
“Enable Licenses window” (page 207)
•
“When the status is Installed (Disabled)” (page 87)
Disabling a license
Prerequisites
You must have Storage Administrator (Initial Configuration) role to perform this task.
You can disable a license that is in enabled status.
To disable a license:
1.
From the Administration tree, click License Keys. The License Keys window opens.
2. Select the license to disable. You can select more than one license to disable at the same time.
3. Display the Disable Licenses window in either of the following ways:
•
In the License Keys window, click Disable Licenses.
•
From the Settings menu, click Environmental Settings > Disable Licenses.
4. Click Finish.
5. Check the settings and click Apply.
Related Topics
•
“Disable Licenses window” (page 208)
Removing a software application
Prerequisites
You must have Storage Administrator (Initial Configuration) role to perform this task.
To remove a software application:
1.
From the Administration tree, click License Keys. The License Keys window opens.
Installing and uninstalling software 87