HP XP7 Storage User Manual
Page 101
codes, see HP XP7 Remote Web Console Messages. The error codes unique to the Report
Configuration Tool and the corresponding actions are as follows.
Return value
Cause of error and action
Error message
Error code
131
A certain period of time elapsed after a
login. Log in again.
A certificate does not become
effective.
EW_COMERR
Please login again.
131
A command was entered before logging in.
Log in and then enter the command.
Login is necessary.
Please login again.
EW_COMERR
131
The specified folder to download to is not
found. See
No such folder.
Please refer to the help.
EW_ENFILE
command reference (raidinf commands) ”
(page 132)
and specify the parameter again.
245
Allocation of internal memory fails. Close
unnecessary programs or reboot the server.
Memory allocate error.
Please other program terminate.
EW_ENOMEM
131
You cannot use the report name specified
by the -report option. Check the report
name and specify a new one.
Report name reserved.
Please check input '-report'
parameter.
EW_INVOPA
131
The hyphen (-) is not added to the option
parameter. See
Invalid option.
Please refer to the help.
EW_INVOPT
command reference (raidinf commands) ”
(page 132)
and revise the parameters.
131
Either of the following causes is possible.
Argument too long.
Please refer to the help.
EW_LNGARG
•
The length of a parameter of the
command exceeds 256 bytes.
•
The length of all the parameters of the
command exceeds 1,021 bytes.
See
“Report Configuration Tool command
reference (raidinf commands) ” (page 132)
and specify a new parameter.
131
The maximum number of SVPs that you can
connect simultaneously is exceeded. Log out
of unnecessary SVPs and reconnect.
Maximum application start.
Please check starting application.
EW_MAXAPP
131
The number of parameters of the command
exceeds 10. See
Maximum argument.
Please refer to the help.
EW_MAXARG
command reference (raidinf commands) ”
(page 132)
and revise the parameters.
131
The required option and parameters were
not entered. See
Required option list.
Please refer to the help.
EW_REQOPT
command reference (raidinf commands) ”
(page 132)
and specify a valid option and
parameters.
131
An internal error occurred. Contact HP
Technical Support.
System error.
Please call to service center.
EW_SYSERR
131
The installation path exceeds 240 bytes.
Specify no more than 240 bytes.
Install path is too long.
Specify the install path with up to
240 bytes.
EW_SYSERR
131
Updating certificate file fails. Contact HP
Technical Support.
Certificate file invalid.
Please call to service center.
EW_SYSERR
Managing tasks
101