HP XP7 Storage - Manual (Page 32)

3. In the Tool Panel dialog box, click Update Certificate Files for SMI-S. The login dialog box for
Update Certificate Files for SMI-S opens.
If SSL communication has been established, the Security Alert dialog box opens before the
login dialog box. In the Security Alert dialog box, click OK.
4. In the login dialog box for Update Certificate Files for SMI-S, enter the administrator's user ID
and password, and click Login. The upload dialog box for Update Certificate Files for SMI-S
opens.
5. In the upload dialog box for Update Certificate Files for SMI-S, enter both the public key
certificate file name in the Certificate file (server.crt file) box and the Private Key file (server.key
file) box. You can enter the file names directly or by clicking Browse.
6. Click Upload. The execution confirmation dialog box for Update Certificate Files for SMI-S
opens.
7. Click OK to update the certificate. Update of the certificate starts.
Upon completion of the certificate update, the SMI-S provider restarts to reflect the update.
Upon completion of the restart of the SMI-S provider, the update completion dialog box for
Update Certificate Files for SMI-S opens
8. In the update completion dialog box for Update Certificate Files for SMI-S, click OK. The
display returns to the login dialog box.
NOTE: If an error occurs during update of the certificate, an error message displays. Resolve the
problem and then run the procedure again, starting with logging in, to upload configuration files
for SMI-S.
NOTE: If the Security Alert dialog box for the certificate opens at other times, click View Certificate
to confirm that the certificate is correct and then click Yes.
Returning an SMI-S provider certificate to default
You can return a certificate updated in “Uploading a signed certificate to the SMI-S provider”
(page 31) to default.
Procedure 1 To return a certificate to default:
1. Close all Remote Web Console sessions on the SMI-S provider.
2. On the Remote Web Console computer, open a web browser and enter the following URL to
open the Tool Panel dialog box.
http://IP-address-or-host-name-of-SVP/cgi-bin/utility/toolpanel.cgi
32 Setting up Remote Web Console