HP XP7 Storage - Manual (Page 60)

Table 12 User name and password for logging in to RAID Manager
Characters that can be used Length in
characters Item
1-63 User name •
Alphanumeric (ASCII code) characters
•
Following symbols (see Note below) :
- . @ _
6- 63 Password •
Alphanumeric (ASCII code) characters
• Following symbols (see Note below) :
- . @ _
NOTE: When you use a Windows computer for RAID Manager, you can also specify a backslash
(\). When you use a UNIX computer for RAID Manager, you can also specify a slash (/).
Procedure 9 To create a user account:
1. In the Administration tree,> select User Groups.
2. In the User Groups tab, select a user group to which to add a user. This is dependent on which
permissions you want to give to the user.
3. In the Roles tab, confirm that the displayed permissions are appropriate for the user.
4. Open the Create User window in one of the following ways:
•
In the User tab, click Create User.
•
From Settings, click User Management > Create User.
5. Enter a name.
6. Select Activate or Lock for the account. If you select Lock, the user of this account is disabled
and cannot log in to Remote Web Console.
7. To use an authentication server, select External. To authenticate users with only Remote Web
Console, select Local.
8. If you select Local, enter the password of this user account in two places.
For a password, all alphanumeric characters and symbols can be used. The length must be
between 6 and 256.
9. Click Finish.
10. In the Confirm window, check the settings and enter a task name in Task Name.
11. Click Apply. The task is registered. If the Go to tasks window for status check box is checked,
the Task window opens.
Changing user passwords
This section explains how to change or re-issue passwords for other users on Remote Web Console.
Prerequisites
•
Security administrators with View & Modify roles can change user passwords on Remote Web
Console.
•
If the target user has a local user account for Remote Web Console, the security administrator
can use Remote Web Console to change the target user’s password.
•
If the target user has a local user account for the authentication server, the security administrator
can use the authentication server to change the target user’s password. After the password is
changed, the target user can use the new password on both the authentication server and
Remote Web Console.
60 Setting up and managing user accounts