HP XP7 Storage - Manual (Page 72)

Table 14 SIM reference codes reported by email (continued)
Alert level Description Reference code
SIM 13 SIM 23 SIM 22
MODERATE Pool became full. xx 2x 62
MODERATE Exceeded the pool usage depletionthreshold. xx 6x 62
Related Topics
•
“Edit Alert Settings window” (page 214)
Configuring email notification
Prerequisites
•
You must have a Storage Administrator account with an Initial Configuration role to perform
this task.
•
You must have a mail server that supports the Simple Mail Transfer Protocol (SMTP).
•
If a firewall is used, port 25 must be used.
Procedure 22 To configure settings for email notices:
1. Click Settings > Environmental Settings > Edit Alert Settings. The E-mail Information window
opens.
2. In Notification Alert, select the destination of the alert notification.
•
Host Report: Reports alerts only to the host(s) for which SIM report setting is made.
•
All: Reports alerts to all hosts.
Alert notification destination is common to Syslog, SNMP, and Email.
3. Select Enable in Mail Notice on the Email tab.
4. In the Email Settings table, set the email destination address and attributes (To, Cc, Bcc).
•
To add an email address, click Add. On the Add Address window, set the email address
and attributes.
•
To change an email address and attributes, select the line for the email address to be
changed, and click Change. In the Change Settings window, change the email address
and attributes.
You can select more than one email address. When you selected more than one email
address, you can change only attributes.
•
To delete an email address, select the line for the email address to be deleted and click
Delete. You can select more than one email address.
This field is mandatory when you select Enable in Mail Notice.
5. Enter the email source address (mandatory) and return address (optional).
You can use up to 255 alphanumeric characters (ASCII codes) and symbols (! # $ % & ` + -
* / ' ^ { } _ . )
72 Configuring the Remote Web Console environment