HP XP7 Storage - Manual (Page 234)

Number of Ports
The following table describes the fields and settings in the Port Condition window.
Description Item
Number of ports in use Available (Connected)
Number of ports that are installed but not in use Available (Not Connected)
Number of ports that are installed but blocked Not Available
Ports not installed Not Installed
Port Conditions
The following table describes the fields and settings in the Port Condition window.
Description Item
Name of the channel adapter Channel Adapter
Type of the channel adapter Adapter Type
Name of the port Port Name
Attribute of the port Attribute
•
Channel adapter type is Fibre: Initiator, Target, RCU Target, or External
• Channel adapter type is Mfibre: HTP or FNP
•
When no port is assigned to the user: A hyphen (-) is displayed.
Port Condition icon and port status Condition
•
Available (Connected): The port is installed and in use.
•
Available (Not Connected): The port is installed and available
• Not Available: The port is either blocked or not assigned to the user.
Data transfer speed of the fibre channel port is displayed in gigabits per second as follows: Speed
•
2 GBps
• 4 GBps
•
8 GBps
• 16 GBps
If Auto is set for Port Speed in the Edit Ports window, this item is displayed as follows:
• Auto (2 GBps)
•
Auto (4 GBps)
• Auto (8 GBps)
•
Auto (16 GBps)
The values in the parentheses are set by the storage system. If linkup is not made, a hyphen
(-) displays.
For details of the Edit Ports window, see the HP XP7 Provisioning for Open Systems User
Guide.
234 Remote Web Console system reference GUI reference