HP XP7 Storage - Manual (Page 139)

The CipherSuites parameter can use any of the following values:
•
TLS_DHE_RSA_WITH_AES_128_CBC_SHA
•
TLS_DHE_DSS_WITH_AES_128_CBC_SHA
•
TLS_RSA_WITH_AES_128_CBC_SHA
•
SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA
•
SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA
•
SSL_RSA_WITH_3DES_EDE_CBC_SHA
Setting up the CipherSuites parameter
Connect cipher suites with a comma (,) as a delimiter.
Example
CipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA,SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA,
SSL_RSA_WITH_3DES_EDE_CBC_SHA
VVolForSnapshot parameter
Use the VVolForSnapshot parameter to specify virtual volumes that the SMI-S provider can use
when you operate Fast Snap from CreateElementReplica of HITACHI_ReplicationService.
All virtual volumes are specified by default.
Setting up the VVolForSnapshot parameter
Set up the parameter by using and with a comma (,) as a delimiter:
•
: Specifies a range of virtual volumes
•
: Specifies a single virtual volume
format
::to::
•
: LDKC number (two-digit hexadecimal) of the first virtual volume in the specified
range
•
: CU number (two-digit hexadecimal) of the first virtual volume in the specified
range
•
: LDEV number (two-digit hexadecimal) of the first virtual volume in the specified
range
•
: LDKC number (two-digit hexadecimal) of the last virtual volume in the specified
range
•
: CU number (two-digit hexadecimal) of the last virtual volume in the specified
range
•
: LDEV number (two-digit hexadecimal) of the last virtual volume in the specified
range
format
<2HexLDKC>:<2HexCU>:<2HexLDEV>
•
<2HexLDKC>: LDKC number (two-digit hexadecimal) of the single virtual volume to be specified
•
<2HexCU>: CU number (two-digit hexadecimal) of the single virtual volume to be specified
•
<2HexLDEV>: LDEV number (two-digit hexadecimal) of the single virtual volume to be specified
Example
VVolForSnapshot=00:00:00to00:00:FF,00:02:00,00:04:00to00:04:FF
User-defined.properties file 139