HP XP7 Storage - Manual (Page 42)

If the error occurs while you are either switching between Modify and View mode, or switching
tabs, wait a few minutes, click Refresh on the File menu, and then retry the operation.
•
When the microcode is being updated on the SVP, you must exit and restart all web client
sessions on the Remote Web Console computer.
•
When you use Remote Web Console on Windows, the Add or Remove Programs window in
the Windows’ Control Panel might or might not display Remote Web Console. Remote Web
Console works in both cases.
Refreshing data after a Auto LUN or Quick Restore operation
During a Auto LUN operation or Business Copy or Business Copy Z Quick Restore operation, a
Remote Web Console window may display old information (data from before the operation) on
logical volume (LDEV) configurations. Wait until the operation completes, and then click File >
Refresh > or File > Refresh All to update the Remote Web Console window.
Refreshing data after operations performed with another application
Be aware that it may take time to refresh the information in Remote Web Console after you have
performed an operation on the storage system using another application, such as RAID Manager.
Capacities displayed on the Remote Web Console screen
Unless otherwise specified in this manual, capacity values are rounded down to the second decimal
place for TB, GB, or MB or to the nearest integer for Cyl when displayed on the Remote Web
Console screen. Therefore, displayed values may be lower than the actual values.
The value converted from 1Cyl to KB depends on the volume's emulation type. The following table
lists cylinder capacities by emulation type.
1 Cylinder Capacity (KB) Emulation Type
960 OPEN-V Open Systems
720 Other
870 - Mainframe
Caution on LUN ID notation
The default LUN ID format used in the Remote Web Console main window in HP XP7 Storage is
decimal. You can change this format to hexadecimal when needed. The format of LUN IDs in the
Remote Web Console secondary window in HP XP7 Storage is always decimal. You cannot change
this format.
In comparison, the LUN ID format used in Remote Web Console in both XP24000/XP20000 Disk
Array and P9500 is hexadecimal.
If the hexadecimal format is selected in the HP XP7 Storage, you can enter the XP24000/XP20000
Disk Array or P9500 LUN IDs as is. However, if the decimal format is set for LUN IDs in the HP
XP7 Storage, convert the LUN IDs to decimal format before entering them in Remote Web Console.
To switch the LUN ID notation of the Remote Web Console main window between decimal and
hexadecimal, use the Edit Information Display Settings window See
“Edit Information Display
Settings window” (page 240) .
Refreshing your user view
If you remain in the same Remote Web Console view while other users change the configuration
of the system, the changes that others make do not appear in your view. You can tell how long it
has been since your screen was refreshed by checking the clock on the title bar to the left of the
Refresh button. The clock displays server time, not the time on your local workstation. When you
42 Getting started using Remote Web Console