HP XP7 Storage - Manual (Page 132)

B Report Configuration Tool command reference (raidinf
commands)
This section describes the raidinf commands, symbols, and reports used in Remote Web Console.
raidinf command list and command description
The following lists the raidinf commands and symbols.
Table 42 raidinf command list
Description Command
Creates a report. raidinf add report
Deletes a report. raidinf delete report
Downloads a report. raidinf download report
Displays a list of reports. raidinf get reportinfo
Table 43 Conventions of the command format
Description Symbol
The item enclosed in this symbol is variable. < >
Symbol is placed between multiple items to indicate "or". |
For example: Vertical bar
-A | -B
Specifies -A or -B.
The enclosed item can be omitted. If some items are delimited by the vertical
bar, specify one or omit all items. [ ]
Square brackets
For example:
[ -A ]
Specifies nothing or specifies -A.
[ -a | -b ]
Specifies nothing or specifies -a or -b.
The meaning differs depending on the enclosed item. { }
Curly brackets •
If items in curly brackets are delimited by vertical bars, one of the items
must be specified.
For example:
{-A | -B |-C }
Specifies -A, -B, or -C.
•
If curly brackets enclose items enclosed by square brackets, at least one
of the items must be specified.
For example:
{[ -A ][ -B ][ -C ]}
Specifies one or more items from -A, -B, or -C.
raidinf command syntax
The syntax of the raidinf commands and the basic format of the options and parameters are
described next.
132 Report Configuration Tool command reference (raidinf commands)