HP XP7 Storage - Manual (Page 71)

1. Click Settings > Environmental Settings > Edit Alert Settings.
2. In Notification Alert, select the destination of the alert notification.
•
Host Report: Reports alerts only to the host(s) for which SIM report setting is made.
•
All: Reports alerts to all hosts.
3. In Transfer Protocol, select the protocol for Syslog transfer.
4. To transfer Syslog to the primary server, select Enable and set the following items:
•
IP Address
•
Port Number
•
Client Certificate File Name, Password, and Root Certificate File Name
Use this field only when you select New Syslog Protocol (TLS1.2/RFC5424) in Transfer Protocol.
5. To transfer Syslog to the alternate server (secondary server), select Enable and set the following
items:
•
IP Address
•
Port Number.
•
Client Certificate File Name, Password, and Root Certificate File Name
Use this field only when you select New Syslog Protocol (TLS1.2/RFC5424) in Transfer Protocol.
6. Enter a name in Location Identification Name for identification for the storage system.
7. If you select New Syslog Protocol (TLS1.2/RFC5424) in Transfer Protocol, also specify timeout,
retry interval, and number of retries.
8. As necessary, click Test Send to Syslog Server to test the settings.
9. Check that the Syslog server has received log (Detailed data: "RefCode:7FFFFF, This is Test
Report.").
10. Click Finish. The Confirm window opens.
11. In the Confirm window, check the settings and enter a task name in Task Name.
12. Click Apply. The task is registered. If the Go to tasks window for status check box is checked,
the Task window opens.
SIMs failures reported by email typically require user action. These SIMs are caused either by
reaching the threshold levels configured by the user, or by a software license needing user attention.
The following SIMs are reported by email:
Table 14 SIM reference codes reported by email
Alert level Description Reference code
SIM 13 SIM 23 SIM 22
SERIOUS License key Expiration. xx F7 7F
SERIOUS Exceeded the licensed capacity. xx F8 7F
SERIOUS Software invalidated by the expiration of the
prerequisite software. xx F9 7F
MODERATE Failure with
paired volumes Exceeded the pool usage threshold. xx 00 60
MODERATE Snapshot Pool or
Fast Snap Pool Pool blockade. xx 2x 60
MODERATE Thin Provisioning
Pool Exceeded the pool usage warning threshold. xx 0x 62
MODERATE Exceeded the pool usage system threshold. xx 1x 62
Reporting failure information about storage systems 71