GW Instek GDS-200 Series Programming Manual - Manual (Page 98)

GDS-200 & GDS-300 Programming Manual
98
Example :TRIGger:COUPle AC
Sets the trigger coupling to AC.
:TRIGger:NREJ
Description Sets or queries noise rejection status.
Syntax :TRIGger:NREJ {OFF | ON | ?}
Parameter OFF Turns noise rejection off
ON Turns noise rejection on
Return parameter Returns the noise rejection status (ON, OFF).
Example :TRIGger:NREJ ON
Turns noise rejection on.
:TRIGger:REJect
Description Sets or queries the frequency rejection status.
Syntax :TRIGger:REJect {OFF | HF | LF | ?}
Parameter OFF Frequency rejection off.
HF High frequency filter on
LF Low frequency filter on
Return parameter Returns the status of the frequency filter.
Example :TRIGger:REJect OFF
Turns the frequency filter off.
:TRIGger:MODe
Description Sets or queries the trigger mode.
Syntax :TRIGger:MODe {AUTo | NORMal | ?}
Parameter AUTo Auto trigger (Untriggered roll)
NORMal Normal trigger
Set
Query
Set
Query
Set
Query