GW Instek GDS-200 Series Programming Manual - Manual (Page 123)

COMMAND DETAILS
123
:TEMPlate:SAVe:MINimum
Description Saves the maximum template.
Syntax :TEMPlate:SAVe:MINimum
:TEMPlate:TOLerance
Description Sets or queries the tolerance as a percentage.
Syntax :TEMPlate:TOLerance {NR2|?}
Parameter/
Return Parameter The auto tolerance range (0.4% ~ 40%)
Example :TEMPlate:TOLerance 10
Sets the tolerance to 10%.
:TEMPlate:SAVe:AUTo
Description Saves the AUTO template (maximum and
minimum templates).
Syntax :TEMPlate:SAVe:AUTo
Set
Set
Query
Set