GW Instek GDS-200 Series Programming Manual - Manual (Page 26)

GDS-200 & GDS-300 Programming Manual
26
Example *SAV 1
Saves the current setup to Set 1.
*SRE
Description Sets or queries the Service Request Enable register.
The Service Request Enable register determines
which registers of the Status Byte register are able
to generate service requests.
Syntax *SRE { | ?}
Parameter/
Return parameter 0~255
Bit Weight Bit# Weight Event Description
0
1 Not used
1 2 Not used
2 4 Not used
3 8 Not used
4 16 MAV Message Available Bit
5 32 ESB Event Status Bit
6 64 MSS Master Summary Bit
6 64 RQS Request Service Bit
7 128 Not used
Example *SRE?
>48
Indicates that the MAVB and ESB bit are both set.
*STB
Description Queries the bit sum of the Status Byte register with
MSS (Master summary Status).
Set
Query
Query