GW Instek GDS-200 Series Programming Manual - Manual (Page 102)

GDS-200 & GDS-300 Programming Manual
102
Return parameter Returns the video trigger line.
Example :TRIGger:VIDeo:LINe 1
Sets the video trigger to line 1.
:TRIGger:VIDeo:POLarity
Description Sets or queries the video trigger polarity.
Syntax :TRIGger:VIDeo:POLarity { POSitive | NEGative | ? }
Related
commands :TRIGger:TYPe
Parameter POSitive Positive polarity
NEGative Negative polarity
Return parameter Returns the video trigger polarity.
Example :TRIGger:VIDeo:POLarity POSitive
Sets the video trigger polarity to positive.
:TRIGger:PULSe:WHEn
Description Sets or queries the pulse width trigger conditions.
Syntax :TRIGger:PULSe:WHEn { MOREthan | LESSthan |
EQual | UNEQual | ? }
Related
commands :TRIGger:TYPe
:TRIGger:PULSe:TIMe
Parameter MORE than >
LESSthan <
EQual =
UNEQual ≠
Return parameter Returns the pulse width trigger conditions.
Example :TRIGger:PULSe:WHEn UNEQual
Sets the trigger pulse width conditions to not equal
to (≠).
Set
Query
Set
Query