GW Instek GDS-200 Series Programming Manual - Manual (Page 74)

GDS-200 & GDS-300 Programming Manual
74
:MEASure:PEDGE
Description Returns the number of positive edges.
Syntax :MEASure:PEDGE?
Related
Commands :MEASure:SOURce
Return parameter Returns the number of positive edges.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:PEDGE?
1.100E+01
Selects Channel 1, and then measures the number
of positive edges.
:MEASure:NEDGE
Description Returns the number of negative edges.
Syntax :MEASure:NEDGE?
Related
Commands :MEASure:SOURce
Return parameter Returns the number of negative edges.
Chan Off Indicates the source channel is not
activated.
Query
Query