GW Instek GDS-200 Series Programming Manual - Manual (Page 127)

COMMAND DETAILS
127
DMM Commands
The DMM commands control the DMM functions on the unit
remotely.
:DMM .........................................................................127
:DMM:VALue .............................................................127
:DMM:HOLD .............................................................128
:DMM:MOD ..............................................................128
:DMM:TRENDplot .....................................................129
:DMM:ADVanced ......................................................129
:DMM:TIMe ...............................................................129
:DMM:CURSORPOS .................................................130
:DMM:TEMPerature:UNITs ......................................131
:DMM:TEMPerature:TYPe .........................................131
:DMM
Description Returns the DMM status.
Syntax :DMM?
Related
commands :MEASUrement:DISPlay
Parameter/Return
parameter Returns the mode, current
measurement, max measurement,
minimum measurement, Hold state.
Example :DMM?
Mode:ACV,Value:0.000,Max Value:0.000,Min
Value:0.000,Hold:OFF
:DMM:VALue
Description Returns the measurement value.
Syntax :DMM:VALue?
Query
Query