GW Instek GDS-200 Series Programming Manual - Manual (Page 131)

COMMAND DETAILS
131
:DMM:TEMPerature:UNITs
Description Sets the units for the temperature measurement
function. This command only applies to the GDS-
300.
Syntax :DMM:TEMPerature:UNITs { Celsius | Fahrenheit | ? }
Parameter/Return
parameter Celsius Degrees Celsius
Fahrenheit Degrees Fahrenheit
Example :DMM:TEMPerature:TYPe Celsius
Sets the temperature measurement to ºC.
:DMM:TEMPerature:TYPe
Description Sets the type of thermocouple used for the
temperature measurement function. This
command only applies to the GDS-300.
Syntax :DMM:TEMPerature:TYPe { TYPEB | TYPEE | TYPEJ |
TYPEK | TYPEN | TYPER | TYPES | TYPET | ? }
Parameter/Return
parameter TYPEB B
TYPEE E
TYPEJ J
TYPEK K
TYPEN N
TYPER R
TYPES S
TYPET T
Example :DMM:TEMPerature:TYPe K
Sets the temperature measurement function to use
the K type thermocouple.
Set
Query
Set
Query