GW Instek GDS-200 Series Programming Manual - Manual (Page 95)

COMMAND DETAILS
95
:TIMebase:WINDow:SCALe
Description Sets or queries the zoom horizontal scale.
Note If the oscilloscope is under “ZOOM” mode, the
main timebase function will be disabled and
cannot be modified.
Syntax :TIMebase:WINDow:SCALe { | ?}
Related
commands :TIMebase:MODe
Parameter Zoom horizontal scale. The range will
depend on the time base.
Return parameter Returns the zoom horizontal scale.
Example :TIMebase:WINDow:SCALe 1.0E-3
Sets the zoom horizontal scale to 1ms.
:TIMebase:EXPand
Description Sets or queries the horizontal expand mode.
Syntax :TIMebase:EXPand { CENTer | TRIGger | ? }
Parameter CENTer Sets the horizontal expand mode by
center.
TRIGger Sets the horizontal expand mode by
the trigger position.
Return parameter Sets the horizontal expand mode (CENTER,
TRIGGER).
Example :TIMebase:EXPand TRIGger
Sets the horizontal expansion from the trigger
position.
Set
Query
Set
Query