GW Instek GDS-200 Series Programming Manual - Manual (Page 125)

COMMAND DETAILS
125
BACKward Moves to the previous waveform in
memory
Sets the current waveform number.
The waveform number must be equal
to or less than the total number of
waveforms, as returned by the
REPLAY:TOTalnum?
query.
Example REPLAY:TOTalnum?
8.960E+02
REPLAY:CURRent 100
REPLAY:TOTalnum?
1.000E+02
Indicates that there are a total of 896 waveforms.
Set the current waveform to #100. The return value
(100) indicates that the current waveform is #100.
Rotate Commands
The rotate function sets the screen orientation.
:ROTATE ....................................................................125
:ROTATE
Description Sets or queries the screen orientation.
Syntax :ROTATE { PORTrait | LANDscape | 0 | 1 | ? }
Parameter/Return
parameter PORTrait / 0 PORTrait
LANDscape / 1 LANDscape
Set
Query