GW Instek GDS-200 Series Programming Manual - Manual (Page 65)

COMMAND DETAILS
65
Example :MEASure:SOURce1 CH1
:MEASure:RMS?
1.31E-3
Selects Channel 1, and then measures the RMS
voltage/current.
:MEASure:CRMS
Description Returns the root-mean-square voltage/current of
one full period.
Syntax :MEASure:CRMS?
Related
Commands :MEASure:SOURce
Return parameter Returns the CRMS value.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:RMS?
1.31E-3
Selects Channel 1, and then measures the CRMS
voltage/current.
:MEASure:AREa
Description Returns the voltage/current area over one or more
full periods.
Syntax :MEASure:AREa?
Related
Commands :MEASure:SOURce
Return parameter Returns the area value.
Query
Query