GW Instek GDS-200 Series Programming Manual - Manual (Page 30)

GDS-200 & GDS-300 Programming Manual
30
Parameter Channel number (1 to 2)
Return parameter 0 Raw data is not ready
1 Raw data is ready
Example :ACQuire1:STATe?
0
Returns 0. The channel 1’s raw data is not ready.
:ACQuire:INTERpolation
Description Selects or returns the interpolation mode.
Syntax :ACQuire:INTERpolation {ET | SINC | ?}
Parameter/Return
parameter ET Set the Equivalent Time interpolation.
SINC Sets to SIN(X)/X interpolation
Example :ACQuire:INTERpolation ET
Sets the scope to ET interpolation.
:ACQuire:RECOrdlength
Description Sets or queries the record length. Please see the
user manual for full details.
Syntax :ACQuire:RECOrdlength { | ?}
Parameter/Return
parameter 1e+3, 1e+4, 1e+5, 1e+6, 5e+6 (GDS-300
only)
Example :ACQuire:RECOrdlength?
1.000000e+04
The record length is currently set to 10000.
Set
Query
Set
Query