GW Instek GDS-200 Series Programming Manual - Manual (Page 61)

COMMAND DETAILS
61
Example :MEASure:SOURce1 CH1
:MEASure:MAX?
1.90E-3
Selects Channel 1, and then measures the
maximum amplitude.
:MEASure:MIN
Description Returns the minimum amplitude.
Syntax :MEASure:MIN?
Related
Commands :MEASure:SOURce
Return parameter Returns the minimum amplitude.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:MIN?
-8.00E-3
Selects Channel 1, and then measures the
minimum amplitude.
:MEASure:AMPlitude
Description Returns the amplitude difference between the
Vhigh-Vlow.
Syntax :MEASure:AMPlitude?
Related
Commands :MEASure:SOURce
Return parameter Returns the amplitude.
Query
Query