GW Instek GDS-200 Series Programming Manual - Manual (Page 80)

GDS-200 & GDS-300 Programming Manual
80
:MEASure:PHAse
Description Returns the phase between source 1 and source 2.
Syntax :MEASure:PHAse?
Related
Commands :MEASure:SOURce
Return parameter Returns the phase difference.
Chan Off Indicates the source channel is not
activated.
Note Select the two source channels before entering this
command.
Example :MEASure:SOURce1 CH1
:MEASure:SOURce2 CH2
:MEASure:PHAse?
4.50E+01
Select channel 1 and 2 as phase source1/2, and
then measure the phase in degrees.
Query