GW Instek GDS-200 Series Programming Manual - Manual (Page 72)

GDS-200 & GDS-300 Programming Manual
72
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:NWIDth?
4.995E-04
Selects Channel 1, and then measures the negative
pulse width.
:MEASure:PDUTy
Description Returns the positive duty cycle ratio as percentage.
Syntax :MEASure:PDUTy?
Related
commands :MEASure:SOURce
Return parameter Returns the positive duty ratio.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:PDUTy?
5.000E+01
Selects Channel 1, and then measures the positive
duty cycle.
:MEASure:PPULSE
Description Returns the number of positive pulses.
Syntax :MEASure:PPULSE?
Query
Query