GW Instek GDS-200 Series Programming Manual - Manual (Page 46)

GDS-200 & GDS-300 Programming Manual
46
:CURSor:DDT
Description Returns the deltaY/deltaT (dY/dT) readout.
Note Only supports CH1~CH2, REF1~REF2 & Math.
Syntax :CURSor:DDT?
Related
Commands :CURSor:MODe
Return Parameter Returns the readout in format.
Example :CURSor:DDT?
4.00E-05
:CURSor:H1Position
Description Sets or returns the first horizontal cursor (H1)
position.
Syntax :CURSor:H1Position {| ?}
Related
Commands :CURSor:H2Position
Parameter Horizontal position
Return parameter Returns the cursor position.
Example :CURSor:H1Position?
-1.34E-3
Returns the H1 cursor position as -1.34ms.
:CURSor:H2Position
Description Sets or returns the second horizontal cursor (H2)
position.
Syntax :CURSor:H2Position { | ?}
Related
Commands :CURSor:H1Position
Query
Set
Query
Set
Query